What Is Timber Worth Per Acre?

The stumpage price of a tree

The price for an acre of lumberjack land can be as high as $2,000 per acre, with the value of the timber growing on it, which can add up to $15,000 an acre. A consulting hatter can appraise the value of pine trees in the forest or plantation. Pine timber is usually sold for less than ten cents per board foot.

A big pine tree is worth $30. The stumpage price is the price paid for a unit of standing timber expressed in terms of measure. The stumpage price is the value of standing timber that is obtained by taking the estimated volume and dividing it by the stumpage price.

Property value is increased by trees. The proximity of healthy trees affects property value. Property prices increased by about 7 percent in residential areas and 18 percent in building lots if you have good tree cover.

The location and the type of timber

The location is a major factor in timber prices. Other factors include the type of timber used, the quantity of timber, and the surrounding mill types. The lumber derived from large pine logs have more demand in an area with many sawmills than smaller logs that are ground to small bits for paper production or wood chips.

It is a habit for wood companies to buy their preferred wood from areas that are close to their mills. They would have to pay higher stumpage prices if they are not spending as much on delivery. It would become very difficult for loggers to supply wood daily if the weather is unfavorable.

They can supply as much wood as they want during the dry season. When there is a high demand, the prices of timber will go up. Loggers will have to concentrate on production in wet weather areas.

The quality of the wood is an influence on timber prices. If the DHB is necessary, trees with lower quality are used to make cheaper products. They are sold at a lower price.

The tree type can be a factor. Smaller trees will take up less space in the truck than larger trees. Depending on the number of trees loaded, they may weigh more.

The Lower Limbs of a Standing Tree

The number and size of the lower limbs on the standing tree is the main factor assigning the different grades. The higher the grade, the longer the tree stretches without limbs or where limbs once anchored. A tree with no limbs for the first 16 feet will probably produce two 8 foot logs.

Number 1 and 2 will be found further up the tree. Each tree will produce different grades of logs, the quality of which will decline up the trunk toward the canopy. It is difficult to come up with an exact dollar amount for a tree.

The Sale of Timber

Learning from experience can be very expensive, and many of the times it is twice-in-a-lifetime occurrences. A mature timber stand has years of growth and value accumulated, and the combined annual income from all those years is frequently marketed in a single transaction. How you sell timber can affect how much money you make, your financial plans, and the cost of forest regeneration.

There are species. Most pine timber brings higher stumpage prices than sweetgum or mixed hardwoods. Black cherry, red oak, cherrybark oak, and white oak are high-quality.

Premium prices can be brought by yellow poplar. The species price varies with location and market demand. Competitive markets.

fair market value for timber is assured by competitive bidding by timber buyers in the local area. The buyer's sole purpose is to avoid competition. The number of bidders and their interest in a sale can be influenced by advertising, which contributes to competition and positively affects the price paid.

If you negotiate with a single appropriate buyer, you can better handle situations like poor markets, unusual harvesting conditions, and specialized products. Have a plan for the future. Landowners should begin planning for the future well in advance of the harvest.

Prices of Timber

The prices shown are based on stumpage prices. The prices are based on an average of the prices of timber buyers across the U.S. Actual prices may be different.

The market effect on timber prices is universal, and states are very similar to regions. The same factors that determine regional prices are also used to influence markets in different states. The market operates in a similar way as the geography, measuring system and products do.

The previous FAQ about price by region has more information. Your trees are worth what someone is willing to pay and also depend on market conditions. Landowners can get help with timber pros, education and market conditions by using Timber Update.

Estimating Timber Prices

Local market conditions are more consequential than prices in the state or region. If you're looking at timber that grows near several mills, it may command a higher price than if you're only looking at one. Getting an idea of the prices most mills are charging for finished lumber can help you work backwards to estimate timber costs.

If you call other sawmills in the area, you can learn what they charge for lumber. It can be difficult to determine timber prices. If you want to get the logs you need shipped directly to your mill, you should start by buying them from a logger.

The cost of removing heavy particles from the Earth

1. Even though statewide or regional prices can give a taste of the level and trends of prices, what your timber is worth is dependent on local market conditions. If your timber is close to a lot of mills, it will command a higher price than if it is far from a lot of mills.

2. The timber stand's value is dependent on the size and species of the trees growing in it. A large, top quality sugar maple would command a significant price premium as a veneer log, while limby and crooked sugar maple would be priced as pulpwood.

It is more expensive to remove them and haul them to a mill. Variables such as distance from the stand to the nearest road, slope, soil wetness, and whether temporary bridges need to be built across streams all can affect operational costs of harvesters and hence what they might be willing to pay to harvest a stand of trees. 5.

State and local timber harvesting and management practices laws can affect what kind of equipment can be used, how close harvests can come to streams, and what contingencies must be made if there are local populations of vulnerable or legally protected plant or animal species in your area. The amount of wood can be removed and the costs of harvesting can be affected by those things. Higher costs make prices less attractive.

The monetary value of trees

It helps to know how much a tree is worth. The answer is that the value of a tree is determined by the types of products you can make from it and who is interested in buying your trees from you. The monetary value of a tree is determined by four factors: the volume of the tree, the grade of the butt log, the potential products it can be turned into, and the current markets for the species.

Aspen is a short-lived tree. The wood is described as white and light-brown, but the contrast between the two is small. The wood has a uniform texture and is straight-grained.

Sugar maple is one of the more expensive woods because of its grain and figure, but also because it can take a lifetime to grow into sawtimber-sized material. There are acres of sugar maple that are smaller than sawtimber-sized aspen. The number of boards that can be sawn from a round log depends on its small end, not the large, because the log will be sawn into a rectangular cant.

The Making of a Million Dollars off Pine Tree

Tim Traugott, a Mississippi State University Extension Service professor, said in the past timber production was economically feasible if you had 20 to 40 acres of land. Five acres of pine trees is more than enough for today's market situation. "That doesn't mean you plant the trees and get a lot of money, you have to manage the timber and thin it a few times over the 35-year lifespan."

The timber will make a profit after 35 years, depending on the amount of land. Landowners can make money off pine trees if they sell timber at maturity. The pine straw is a source of income and is often overlooked.

Landowners can either harvest the pine straw themselves or contract with a harvester to do the work. The benefits of hiring someone else to harvest may outweigh the reduction in profit. Landowners who contract with someone to harvest their pine straw can make a lot of money.

Hatcher said that getting the pine straw up also helps to reduce a potential fire hazard. There are two main ways of harvesting. Buying equipment to harvest is less labor-intensive than buying it for other purposes.

A hand baler is more labor-intensive and is a relatively simple and inexpensive method to purchase. baling can be extended until the stand's first thinning if the stand is at least 6 years old. Needle harvest can continue after logging debris cleared.